Fitting The Kmas Interface Pwb - Kyocera TASKalfa 4500i Service Manual

Fitting the KMAS interface PWB

2. Remove seven screws and then
remove the rear upper cover.
3. Attach one spacer A and three spacers
B to the side of the controller box.
Rear upper
cover
Screws
Screws
Spacer B
Spacer B
1-2-53
Screws
Screw
Figure 1-2-66
Controller box
Spacer A
Spacer B
Figure 1-2-67
2LL/2LJ/2LH