3. Remove a screw and slide the lever
right wards.
4. Fix the lever using the screw previously
removed at the right screw hole and
unlock the developer waste exit.
*: When the device is shipped again or
removed, use the reverse procedure to
lock in the developer waste exit. Failure
to observe this caution could result in
deteriorated print quality and/or C call
(7460).
Replacing operation panel sheet
1. Insert a flat-head screwdriver and slide
the operation panel covers A and B to
remove them.
[Locked]
2
Lever
1
Screw
Figure 1-2-17
Operation panel
cover B
Figure 1-2-18
1-2-13
2LL/2LJ/2LH-1
[Released]
Lever
3
Screw
Operation panel
cover A