Adding A Destination On One Touch Key (One Touch Key) - Kyocera ECOSYS MA4500fx Operation Manual

Preparation before Use > Registering Destinations in the Address Book

Adding a Destination on One Touch Key (One Touch Key)

Assign a new destination (contact or group) to an one touch key. A maximum of 22 destinations can be
registered.
NOTE
• Numbers 1 to 11 are the One Touch Key numbers while the [Shift Lock] indicator is switched off. Numbers 12
to 22 are the One Touch Key numbers while the [Shift Lock] indicator is switched on by selecting the [Shift
Lock] key.
• Refer to the following for use of One Touch Key.
Specifying Destination (page 5-29)
• You can add One Touch keys and change their settings on Command Center RX.
Registering Destinations (page 2-56)
1
Select the One Touch Key to be registered.
1 In the Send or FAX screen, press the One Touch Key that you want to register and hold it (2 seconds or
more).
2 [ ] [ ] key > key number > [OK] key
Select a One Touch Key number with no registered destination.
2
Select the destinations.
1 Select the destination (contact or group) you want to register to the One touch key from the Address
Book.
NOTE
Select [Menu] and select [Search(Name)] to search using a name.
2 Select the destination to be registered to the One touch key from the destinations registered in the
addresses and select the [OK] key.
The destination will be added to the One Touch Key.
3-38