Setting Backup Data Reading/Writing - Kyocera TASKalfa 4500i Service Manual

Item No.
U917

Setting backup data reading/writing

Description
Retrieves the backup data to a USB memory from the machine; or writes the data from the USB
memory to the machine.
Purpose
To store and write data when replacing the HDD.
Method
1. Press the power key on the operation panel, and after verifying the power indicator has gone
off, switch off the main power switch.
2. Insert USB memory in USB memory slot.
3. Turn the main power switch on.
Wait for 10 seconds to allow the machine to recognize the USB memory.
4. Enter maintenance item U917.
5. Select [Import] or [Export].
Import
Export
6. Select the item.
Display
Address Book
Job Account
One Touch
User
Program
Shortcut
Fax Forward
Document Box
IC Card
* : Since data are dependent with each other, data other than those assigned are also
retrieved or written in.
7. Press the start key. Starts reading or writing.
The progress of selected item is displayed in %.
When an error occurs, the operation is canceled and an error code is displayed.
8. When normally completed, [Finish] is displayed.
9. Turn the main power switch off and on after completing writing when selecting [Import].
Display
Writing data from the USB memory to the machine
Retrieving from the machine to a USB memory
Description
Address book
Job accounting
Information on one-touch key
User managements
Program information
Shortcut information
FAX transfer information
Document box information
IC card information
Description
Description
-
-
Address book
Job accounting
Job accountings and user manage-
ments
Job accountings, user managements
and document box information
Job accountings, user managements
and document box information
Job accountings and user manage-
ments
-
1-3-167
2LL/2LJ/2LH
Depending data