Kyocera TASKalfa 4500i Service Manual page 85

6. Remove two screws and then remove
the lid.
7. Connect the connector of the vender
signal cable to the connector YC23 on
the engine PWB.
8. Pass the vender signal cable through
nine wire saddles and then fasten the
cable.
Figure 1-2-79
YC23
Engine PWB
Vender signal cable
Wire saddles
Wire saddle
Wire saddles
Figure 1-2-80
1-2-61
2LL/2LJ/2LH-1
Lid
Wire
saddles
Screws
Wire
saddle