Kyocera TASKalfa 4500i Service Manual page 412

6. Unhook the hook of the feed holder
assembly.
7. Remove the spring and the feed holder
assembly from the top base.
8. Remove two stop rings.
9. Pull the feed MPF shaft out.
10. Remove two bushes, one way gear
Z30R and MP paper feed pulley.
*: To refit the one-way gear Z30R, mount
the gear in the correct direction as
shown.
Top base
MP paper feed pulley
Oneway gear
Z30R
Oneway gear
Oneway
clutch
Bush
Stop ring
1-5-15
Spring
Hook
Feed holder assembly
Top base
Spring
Hook
Figure 1-5-24
Z30R
Feed MFP shaft
2LL/2LJ/2LH
Stop ring
Bush