Kyocera TASKalfa 4500i Service Manual page 49

26. Mount two M4 nuts at the back of the
right upper cover.
27. Insert the projection of the key counter
cover retainer in the aperture of the
right upper cover.
28. Fit the key counter cover retainer using
the two M4 x 20 screws.
M4 nuts
Figure 1-2-32
Right upper cover
Aperture
M4 x 20 screw
Figure 1-2-33
1-2-25
Right upper cover
M4 x 20 screw
Key counter
cover retainer
2LL/2LJ/2LH
Projection