Adding A Destination On One Touch Key (One Touch Key) - Kyocera 7056i Operation Manual

Preparation before Use > Registering Destinations in the Address Book
Adding a Destination on One Touch Key (One Touch
Key)
Assign a new destination (contact or group) to an one touch key. A maximum of 1,000 destinations can be registered.
NOTE
• Refer to the following for use of One Touch Key.
Specifying Destination (page 5-40)
• You can add One Touch keys and change their settings on Embedded Web Server RX.
Registering Destinations (page 2-71)
• If registering and editing of the One Touch Keys is restricted to administrators, you can edit the One Touch Keys by
logging in with administrator privileges.
Edit Restriction (page 8-67)
Embedded Web Server RX User Guide
1
2
Display the screen.
[System Menu/Counter] key > [Edit Destination] > "One Touch Key" [Add/Edit]
Add One Touch Keys.
1
Select a One Touch Key number (0001 to 1000) for the destination > [Add/Edit]
Selecting [No.] or the Quick No. Search key on the numeric keypad enables direct entry of
a One Touch Key number.
NOTE
For the Quick No. Search key, refer to the following:
Using the Quick No. Search Key (page 2-26)
Select a One Touch Key with no registered destination.
Edit Destination - One Touch Key
Add a One Touch key.
0001 0002 0003
AAA BBB CCC
0006 0007 0008
0011 0012 0013
0016 0017 0018
2
Select "Display Name" [Change].
3
Enter the One Touch Key name displayed in the send base screen > [OK]
NOTE
Up to 24 characters can be entered.
Refer to the following for details on entering characters.
Character Entry Method (page 11-9)
4
Select "Destination" [Change].
The Address Book appears.
1
2
0004 0005
No.
Add/Edit
0009 0010
Delete
1/50
0014 0015
0019 0020
Detail
Close
m034701
3-32