Initial Setting For The Developer - Kyocera TASKalfa 4500i Service Manual

Item No.
U130

Initial setting for the developer

Description
The toner sensor control bias is adjusted so that the sensor output is set as the target value with
the initial developer.
Purpose
Automatically executed when the developer unit loaded with the initial developer is replaced.
Method
1. Press the start key.
2. Select [Execute].
3. Press the start key.
Toner installation is started and the control value of the toner sensor is displayed.
K
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Display
Toner sensor control voltage
Description
Description
1-3-75
2LL/2LJ/2LH-1