Table of Contents
Advertisement
1.3.1.1 Precautions
• Make sure t he rack will safely support t he com bined weight of all t he equipm ent it cont ains.
• Make sure t he posit ion of t he Swit ch does not m ake t he rack unst able or t op- heavy. Take all
necessary precaut ions t o anchor t he rack securely before inst alling t he unit .
1.3.2 Attaching the Mounting Brackets to the Switch
Posit ion a m ount ing bracket on one side of t he Swit ch, lining up t he four screw holes on t he bracket
1
wit h t he screw holes on t he side of t he Swit ch.
Figure 1 At t aching t he Mount ing Bracket s
Using a # 2 Philips screwdriver, inst all t he M3 flat head screws t hrough t he m ount ing bracket holes
2
int o t he Swit ch.
Repeat st eps
3
You m ay now m ount t he Swit ch on a rack. Proceed t o t he next sect ion.
4
1.3.3 Mounting the Switch on a Rack
Posit ion a m ount ing bracket ( t hat is already at t ached t o t he Swit ch) on one side of t he rack, lining
1
up t he t wo screw holes on t he bracket wit h t he screw holes on t he side of t he rack.
Figure 2 Mount ing t he Swit ch on a Rack
Chapter 1 Hardware Installation and Connection
1
and
2
t o inst all t he second m ount ing bracket on t he ot her side of t he Swit ch.
MGS3750-28F User's Guide
8
Advertisement
Table of Contents
