H Messages - Nortel 8300 Reference Manual

96 Chapter 4 SMP log error messages
Message gtTxPortShaperEnable: Failed, status = <value>
Severity ERROR
Description This message identifies a driver programming error. Specifically, an attempt to
enable/disable the port shaper failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.

H Messages

Message HAL_Init: NPAL_GtNhopTblInit failed
Severity ERROR
Description This message identifies a failure in the software next hop table initialization
process.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message Head pointer passed as NULL for adding an entry to SNMP Sessions LinkedList
Severity ERROR
Description This message identifies a software error.
Synopsis Software error.
Action Contact customer support for assistance.
Message Head pointer passed as NULL for removing an entry from SNMP Sessions
LinkedList
Severity ERROR
Description This message identifies a software error.
Synopsis Software error.
Action Contact customer support for assistance.
316806-C