Nortel 8300 Reference Manual page 64

64 Chapter 4 SMP log error messages
Message Closed telnet connection from <ip-address> user <user-name>
Severity INFO
Description This message is generated when a telnet connection to the switch terminates.
Synopsis N/A
Action N/A
Message Connection lost to slot <value> ...
Severity ERROR
Description IPC connection between the CP card and a given I/O slot is lost.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message Connection not found for connection Id <value>
Severity ERROR
Description IPC connection between the CP card and I/O card cannot be found in software
database.
Synopsis N/A
Action This is caused by the IPC connection setup, or a corruption of the software data
structures.
Message Consistency check failed for Bootp table syncing RED_BOOTP_INFO
Severity ERROR
Description This message indicates a consistency check for the bootp table failed.
Synopsis N/A
Action N/A
Message cosLibInit: failed
Severity ERROR
Description This message specifies the CoS library initialization failed.
Synopsis N/A
Action Reboot the switch if you wish to use CoS functions.
316806-C