Nortel 8300 Reference Manual page 138

138 Chapter 4 SMP log error messages
Message portDisableMirroring_8300: gmirrDelTxport port <#> failed
Severity WARNING
Description This message specifies that a Tx port hardware entry deletion failed.
Synopsis N/A
Action Verify the correct command parameters in the documentation and try again.
Message portEnableFlowControl_8300 called for non-8300 port
Severity INFO
Description This message indicates there is a non-8300 port in the system.
Synopsis N/A
Action N/A
Message portEnableFlowControl_8300: gprtPortFlowControlEnable Failed for port <value>
Error <value>
Severity WARNING
Description This message indicates that a hardware write failed for port flow control.
Synopsis N/A
Action N/A
Message portEnableFlowControl_8300: gtPortXoffLimitSet Failed for port <value> Error
<value>
Severity INFO
Description This message indicates that a hardware write failed for port flow control.
Synopsis N/A
Action N/A
Message portEnableFlowControl_8300: gtPortXonLimitSet Failed for port <value> Error
<value>
Severity INFO
Description This message indicates that a hardware write failed for port flow control.
Synopsis N/A
Action N/A
316806-C