Nortel 8300 Reference Manual page 160

160 Chapter 4 SMP log error messages
Message rad_newSocket failed to allocate memory
Severity ERROR
Description This message indicates that the system is out of memory.
Synopsis Insufficient memory.
Action If the problem persists, contact customer support.
Message rad_receiveResponse received response with bad length recvd<num>
Severity ERROR
Description This message indicates an invalid length for the received RADIUS response
packet.
Synopsis The packet size of incoming RADIUS response must be equal to the size
mentioned in the packet header.
Action Verify that the RADIUS server is functioning correctly. If the problem persists,
contact customer support.
Message rad_receiveResponse recvfrom failed<num>
Severity ERROR
Description This message indicates that the switch is unable to receive data on the UDP
socket.
Synopsis Software error.
Action Contact customer support.
Message rad_Request failed to allocate memory
Severity ERROR
Description This message indicates that the system is out of memory.
Synopsis Insufficient memory.
Action If the problem persists, contact customer support
Message rad_Request Unknown request type<num>
Severity ERROR
Description This message identifies an internal error in the software.
Synopsis Software error.
Action If the problem persists, contact customer support.
316806-C