Nortel 8300 Reference Manual page 200

200 Chapter 4 SMP log error messages
Message tapiCreateTc: Policy Id <value> doesn't exist
Severity ERROR
Description This message is generated when there is an application programming error.
Specifically, the policy with the specified ID cannot be found.
Synopsis N/A
Action File a bug report.
Message tapiSetDropProfileByClass: Failed, status = <value>
Severity ERROR
Description This message is generated when there is a driver programming error. Specifically,
an attempt to bind drop the profile to a Tx queue failed.
Synopsis N/A
Action Contact the customer service team if the problem persists.
Message tapiUpdateTc: Policy Id <value> doesn't exist
Severity ERROR
Description This message is generated when there is an application programming error.
Specifically, the policy with the specified ID cannot be found.
Synopsis N/A
Action File a bug report.
Message tcLibInit: failed
Severity INFO
Description This message is generated when a policing library initialization fails.
Synopsis N/A
Action Reboot the switch if you want to enable policing.
Message TCP socket to server xyz port xyz, already connected
Severity ERROR
Description TCP socket to server xyz port xyz, already connected
Synopsis Should not happen, but should not disturb TACACS+ operation
Action N/A
316806-C