Nortel 8300 Reference Manual page 113

Message mcosSetCosByDscpDp:Marking Table Failed, status = <value>
Severity ERROR
Description This message identifies a driver programming error. In this case, an attempt to set
the dscp-to-cos-policed-map failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message mcosSetCosByDscpDp:remarking Table Failed, status = <value>
Severity ERROR
Description This message identifies a driver programming error. In this case, an attempt to set
the dscp-to-cos-policed-map failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message mcosSetCosByTcDp: Failed, status = <value>
Severity ERROR
Description This message identifies a driver programming error. In this case, an attempt to set
the class-to-802.1p-policed-map failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message Message New Mac -- Old Mac -- - Port -- being shut down
Severity WARNING
Description This message is generated when a new Mac Address is seen on an 8021x
authorized port.
Synopsis Possible security threat.
Action The port is shut down. Initialize the port again.
Message Message not sent for deleting msgQ for snmp accounting
Severity ERROR
Description This message indicates the Passport 8300 is unable to free software resources.
Synopsis Software error.
Action Contact customer support for assistance.
Chapter 4 SMP log error messages 113
System Messaging Platform Reference Guide