Nortel 8300 Reference Manual page 75

Message diagUpdatePortMirrorStructures_8300: Invalid Mode ID <value>
Severity WARNING
Description This message indicates that an incorrect mirroring mode parameter exists.
Synopsis N/A
Action Verify the correct command parameters in the documentation and try again.
Message DLD file <file> is not found
Severity WARNING
Description This message indicates that the DLD file is not found.
Synopsis N/A
Action Copy the DLD file to the flash.
Message dmaStartupLoopback: Can't send frame! seq=<value> len=<value>
Severity ERROR
Description This message identifies a cppTxFrame() return failure when doing the loopback
test.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message due to insufficient MLT's
Severity INFO
Description The possible reason for this message is that the "PreConfigTask: Slot <value> NO
pre-configured."
Synopsis N/A
Action N/A
Chapter 4 SMP log error messages 75
System Messaging Platform Reference Guide