Nortel 8300 Reference Manual page 202

202 Chapter 4 SMP log error messages
Message traceDumpBkTr: failed to get CP slot number
Severity ERROR
Description This message is generated when the system fails to get the CP slot number when
sending trace info from the coprocessor.
Synopsis N/A
Action N/A
Message traceStart: Cannot create CopTraceLockSemId semaphore
Severity FATAL
Description This message is generated when the system cannot create the semaphore.
Synopsis N/A
Action Reboot the switch and contact the customer service team if the problem persists.
Message traceStart: malloc failed
Severity FATAL
Description This message is generated when the system runs out of memory.
Synopsis N/A
Action Reboot the switch and contact the customer service team if the problem persists.
Message trBmErrorHandler: resetting slot <value>
Severity ERROR
Description This message is generated when there are buffer management errors on a given
slot and the card is being reset to recover from the error condition.
Synopsis N/A
Action N/A
Message trBmErrorHandler: send reset request to secondary CP
Severity ERROR
Description This message is generated when there are buffer management errors on the
secondary CPU and a message is being sent asking it to reset itself.
Synopsis N/A
Action N/A
316806-C