Nortel 8300 Reference Manual page 34

34 Chapter 3 Setting up SMP logs using the NNCLI
Table 9
2 of 2)
show logging file
followed by:
[category <value>]
[severity <value>]
[CPU <value>]
save-to-file <value>
Configuration example
This configuration example uses the commands listed in
show all of the log messages generated by IP with severity levels of ERROR or
WARNING. The example also displays the log messages from the specified file
name, /pcmcia/sample.txt.
show logging file name-of-file /pcmcia/sample.txt category IP
severity ERROR|WARNING cpu CPU3
316806-C
Display log information by file name, category, severity and CPU (Sheet
Filters and lists the logs (individually or combined)
according to category, severity, and the CPU that
generated it. Valid categories, severities, and CPUs are
listed in Table 2 on page
Table 3 on page 18, respectively.
Redirects the output to a file specified and removes all
encrypted information. The tail option is not supported
with the
save-to-file
specify the destination file name, for example:
/pcmcia/newlog.txt.
18, Table 4 on page 19, and
option. Replace <value> to
Table 9 on page 33 to