Nortel 8300 Reference Manual page 171

Message rcIpAddRoute: rcIpAddArp failed with <value> Status.
Severity ERROR
Description This message is generated if the system is unable to add the ARP entry to the
table.
Synopsis Addition of the ARP is unsuccessful.
Action Enter a valid IP and next-hop.
Message rcIpAddRoute: rcIpAddArp failed with <value>: <ipaddr> nh: <nexthop> cid <cid>
Severity ERROR
Description This message specifies a failure to add the ARP entry in hardware.
Synopsis N/A
Action N/A
Message rcIpAddRoute: route pointer is null
Severity ERROR
Description This message is generated when an invalid or null route entry is created in the CLI
for adding an IP route.
Synopsis Invalid route entry for adding IP route.
Action Provide a valid route entry in the CLI.
Message rcIpAddrTblConsistencyCheck: unable to allocate an IpRec for IfIndex <value>
Severity ERROR
Description This message is generated if the IP record is not a valid entry. It occurs while
performing the table consistency check.
Synopsis Invalid IP record entry.
Action This is an internal error. Contact customer support for further troubleshooting.
Message rcIpAddrTblConsistencyCheck: unknown row status <value>
Severity ERROR
Description This message is generated if an invalid row status is encountered during a
consistency check on the table.
Synopsis Invalid row status encountered.
Action This is an internal error. Contact customer support for further troubleshooting.
Chapter 4 SMP log error messages 171
System Messaging Platform Reference Guide