Nortel 8300 Reference Manual page 59

Message cannot allocate memory for tIGMP_QUERIER
Severity FATAL
Description This message indicates there is a memory allocation failure.
Synopsis N/A
Action N/A
Message cannot allocate rcip_route_index object
Severity FATAL
Description This message is generated when the system is unable to allocate memory for the
RCIP object.
Synopsis Unable to allocate memory for RCIP route object.
Action Increase DRAM size and contact customer support for further troubleshooting.
Message Cannot bind BpduVlanId <value> to stg <value>, err=<value>
Severity ERROR
Description The binding of the Spanning Tree Group (STG) to the BPDU VLAN failed in
hardware during STG creation.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message Cannot bind Vlan <value> to stg <value>, err=<value>
Severity ERROR
Description The binding of the STG to the BPDU VLAN failed in hardware during STG
creation.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message Cannot config card due to condition specified
Severity INFO
Description This message is generated when a card cannot be configured because of the
specified conditions.
Synopsis Card is not configured.
Action N/A
Chapter 4 SMP log error messages 59
System Messaging Platform Reference Guide