Nortel 8300 Reference Manual page 174

174 Chapter 4 SMP log error messages
Message rcIpArpLock: Can't take semaphore, rcIpArpLockSemId!
Severity ERROR
Description This message indicates that the software ARP lock could not be accepted.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message rcIpArpUnlock: semGive failed!
Severity ERROR
Description This message indicates that the software ARP lock could not be accepted.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message rcIpBootPReply: cppTxFrame failed!
Severity ERROR
Description This message is generated when there is a failure while forwarding a bootP
Replay packet frame through the specified port. The CPU transmit queue may be
full, the CPU frame buffer may be used up, or there may be another problem.
Synopsis A frame cannot be transmitted.
Action More troubleshooting is required.
Message rcIpConfDhcpTbIGet invalid get option
Severity ERROR
Description This message indicates that a valid SNMP GET is selected.
Synopsis SNMP GET option invalid.
Action More troubleshooting is required.
Message rcIpConfDhcpTbIGet invalid Mode
Severity ERROR
Description This message indicates that an invalid mode is selected.
Synopsis Mode invalid.
Action More troubleshooting is required.
316806-C