F Messages - Nortel 8300 Reference Manual

F Messages

Message fail config STG for mgmt VLAN
Severity ERROR
Description This message is generated when an attempt to create an STG for the specified
VLAN fails.
Synopsis Cannot create STG.
Action Contact customer support for further troubleshooting.
Message failed deleting a route in rcIpRouteTblSet()
Severity ERROR
Description This message is generated when the deletion of a route fails.
Synopsis Cannot delete the route.
Action Contact customer support for further troubleshooting.
Message Failed to assign IP address to mgmt VLAN
Severity ERROR
Description This message is generated when assigning an IP address to the management
VLAN fails during the system initialization pre-configuration process.
Synopsis Cannot assign IP address.
Action Contact Customer Support for further troubleshooting.
Message Failed to connect TCP socket to server xyz port xyz, errno xyz
Severity ERROR
Description Failed to set socket connect operation to specific TACACS+ server
Synopsis Check server configuration
Action N/A
Message Failed to create IMC VLAN
Severity ERROR
Description This message is generated when creating an IMC VLAN fails during the system
initialization pre-configuration process.
Synopsis Cannot create VLAN.
Action Contact customer support for further troubleshooting.
Chapter 4 SMP log error messages 81
System Messaging Platform Reference Guide