Nortel 8300 Reference Manual page 161

Message rad_sendRequest unable to send a UDP packet error<num>
Severity ERROR
Description This message indicates that the switch is unable to send a UDP packet.
Synopsis Software error.
Action If the problem persists, contact customer support.
Message rad_sendRequest unknown code<num> in radius send pkt
Severity ERROR
Description This message identifies an internal mismatch in the software for the RADIUS
packet code.
Synopsis Software error.
Action If the problem persists, contact customer support.
Message rad_writeLog invalid message size<num>
Severity ERROR
Description This message indicates that the IGAP accounting log message size is invalid.
Synopsis Software error.
Action If the problem persists, contact customer support.
Message radAcctBuildStopInterimValuePair failed to allocate memory
Severity ERROR
Description This message indicates that the system is out of memory.
Synopsis Insufficient memory.
Action If the problem persists, contact customer support.
Message radAcctInterim failed to allocate memory
Severity ERROR
Description This message indicates that the system is out of memory.
Synopsis Insufficient memory.
Action If the problem persists, contact customer support.
Chapter 4 SMP log error messages 161
System Messaging Platform Reference Guide