Nortel 8300 Reference Manual page 122

122 Chapter 4 SMP log error messages
Message NPAL_EnableVrId: NPAL_SetDefaultIpRoute failed
Severity WARNING
Description This message indicates that an attempt to set the default route to either CPU or
DROP in the hardware failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_gstpSetMode(<value>, <value>) failure code: <value>!
Severity ERROR
Description This message indicates that the setting of multiple Spanning Tree mode failed.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message NPAL_ProcCreateIpBulkListL Adding bulk prefix failed status <value>
Severity WARNING
Description Failed to add bulk unicast prefix entries in hardware.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_ProcDeIIpBulkList: Delbulk prefix failed status <value>
Severity WARNING
Description Failed to delete bulk unicast prefix entries in hardware.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_ProcDelArpBulkList: del bulk next hop failed status <value>
Severity WARNING
Description Failed to delete bulk next hop entries in hardware.
Synopsis N/A
Action Contact the customer support team if the problem persists.
316806-C