Nortel 8300 Reference Manual page 120

120 Chapter 4 SMP log error messages
Message NPAL_CreateCpuandDropNhIds: failed creating DROP NH Status <value>
Severity ERROR
Description This message indicates that an attempt to create the special next- hop in
hardware pointing to DROP failed. This next hop will be used by default route and
will never be deleted.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_CreateNhId: could not create next hop <ip addr>, Status <value>
Severity WARNING
Description This message indicates that an attempt to create the next-hop entry in hardware
failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_CreateSingleInlif: failed enabling Uc routing lifIfIndex: <value>, status:
<value>
Severity INFO
Description You need to enable routing for each port on the Passport 8300. This message
indicates a failure in hardware when enabling IP routing for that interface.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message NPAL_DeleteArp: Delete UcNextHop failed entry <ip addr> nhId <value> status
<value>
Severity WARNING
Description This message indicates that an attempt to delete the next hop in hardware failed.
Synopsis N/A
Action Contact the customer support team if the problem persists.
316806-C