Nortel 8300 Reference Manual page 106

106 Chapter 4 SMP log error messages
Message IpDoSpecial: ipNetToMediaPhysAddress_index arpadd failed!
Severity ERROR
Description This message is generated when you try to add a static ARP entry from JDM and
the action fails.
Synopsis N/A
Action Contact customer support for further troubleshooting.
Message IpDoSpecial: ipNetToMediaPhysAddress_index Port %d not a member of vlan
Severity ERROR
Description This message is generated when the supplied Ifindex (Interface index which is
unique for each port or VLAN) is not associated with any VLAN.
Synopsis Wrong interface index.
Action Contact customer support for further troubleshooting.
Message IpDoSpecial: ipNetToMediaPhysAddress_index rcIpLoadArpRecfailed
Severity ERROR
Description This message is generated if an attempt to load the ARP entry into the static ARP
table fails.
Synopsis Cannot load a static ARP record.
Action The ARP table may be corrupted or the system is unable to allocate memory.
Message ipForward: pP2IpBd == NULL
Severity ERROR
Description This message is generated when the frame desc buffer passed is NULL.
Synopsis System Error.
Action Contact customer support for further troubleshooting.
Message ipLocAddrFind: Can't find IfIndex for cid
Severity FATAL
Description This message is generated when the system tries to find the local IP address and
no IP record exists for the given interface index. The system software IP table
could be corrupted.
Synopsis Cannot find an IP record for a specific interface index.
Action Contact customer service and have the following information available for further
analysis: system logs including any memory dumps, switch configuration, and
network topology.
316806-C