Nortel 8300 Reference Manual page 114

114 Chapter 4 SMP log error messages
Message Message not sent for sending interim accounting message for snmp accounting
Severity ERROR
Description This specifies that a RADIUS accounting interim message was not sent due to a
software error.
Synopsis Because of unstable conditions in the software, a RADIUS message is not sent.
Action If problem persists, contact customer support.
Message Message not sent for sending on accounting message for snmp accounting
Severity ERROR
Description This specifies that a RADIUS accounting ON message was not sent due to a
software error.
Synopsis Because of unstable conditions in the software, a RADIUS message is not sent.
Action If the problem persists, contact customer support.
Message Message not sent for sending stop accounting message for snmp accounting
Severity ERROR
Description This specifies that a RADIUS accounting STOP message was not sent due to a
software error.
Synopsis Because of unstable conditions in the software, a RADIUS message is not sent.
Action If the problem persists, contact customer support.
Message Mirroring Disable FAILED for Entry <id>
Severity WARNING
Description When a mirroring port is detected as not present, the Passport 8300 cannot delete
a mirroring hardware table entry because of an incorrect ID or a lack of OS
resources.
Synopsis N/A
Action Verify the correct command parameters in the documentation and try again.
Message Mirroring Enable FAILED for Entry <id>
Severity WARNING
Description When a mirroring port is detected as present, the Passport 8300 cannot enable a
mirroring hardware table entry because of an incorrect ID or a lack of OS
resources.
Synopsis N/A
Action Verify the correct command parameters in the documentation and try again.
316806-C