Nortel 8300 Reference Manual page 151

Message ppePoLDownloadImage: invalid packet received
Severity INFO
Description This message indicates that an invalid packet ID was detected during image
download.
Synopsis N/A
Action Reset the PoE card using admin disable, re-enable the card, and restart the
image upgrade process again.
Message ppePoLDownloadImage: malloc failed
Severity INFO
Description This message specifies that the system is out of memory space for an image
download.
Synopsis N/A
Action Reset the PoE card using admin disable, re-enable the card, and restart the
image upgrade process again.
Message ppePoLFwUpgradeTask: image programming failed
Severity ERROR
Description This message indicates that an image upgrade failed.
Synopsis N/A
Action Reset PoE card using admin disable, re-enable the card, and restart the image
upgrade process again.
Message ppeSetMltPort: Logical Id for MLT <value> not initialized
Severity ERROR
Description This message indicates that an attempted port addition/deletion on an MLT was
not configured in the hardware.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists
Chapter 4 SMP log error messages 151
System Messaging Platform Reference Guide