Nortel 8300 Reference Manual page 74

74 Chapter 4 SMP log error messages
Message Deny/Permit setting update failed while updating next hop for Acl <value> Ace
<value> with status
Severity ERROR
Description This message indicates the ACE is in redirect mode and the specified next-hop
became available/unavailable. However, the filter could not be updated in
hardware.
Synopsis N/A
Action Check the ARP and hardware next-hop tables.
Message Deny/Permit setting update for for filter action FAIL with status: <value>
Severity ERROR
Description This message indicates the ACE is in redirect mode and the specified next-hop
became available/unavailable. However, the filter could not be updated in
hardware.
Synopsis N/A
Action Check the ARP and hardware next-hop tables.
Message detected loop - 1: timer <value> TRYING TO LINK A TIMER THAT ALREADY
EXISTS
Severity ERROR
Description This message is generated when the system tries to link a timer that already
exists.
Synopsis Linking a timer that already exists.
Action Internal protocol error, upgrade the software.
Message detected loop - 2: timer 0x%x TRYING TO LINK A TIMER THAT ALREADY
EXISTS
Severity ERROR
Description This message is generated when the system tries to link a timer that already
exists.
Synopsis Linking a timer that already exists.
Action Internal protocol error, upgrade the software.
316806-C