Nortel 8300 Reference Manual page 78

78 Chapter 4 SMP log error messages
Message EapTransmitEapolPkt: Can't send frame!
Severity ERROR
Description This message is generated when system encounters unexpected error while
sending out an EAPOL frame out of a port.
Synopsis System error
Action Report the problem
Message Enable Mirroring FAILED for Entry <id> Deleting the mirroring record...
Severity WARNING
Description This message specifies that a mirroring hardware table entry could not be added
because of an incorrect ID or a lack of OS resources.
Synopsis N/A
Action Verify the correct command parameters in the documentation and try again.
Message errmsg <msgcode>
Severity ERROR
Description This message lists the error code when bootp cannot obtain the file name.
Synopsis N/A
Action Ensure that the file is on the flash.
Message Error - Fail STG consistency check
Severity ERROR
Description This message is generated when an STG consistency check fails.
Synopsis The fields in the STG table entry may be corrupted.
Action Contact customer support for further troubleshooting.
Message Error - Fail to create STG <value> for mgmt VLAN
Severity ERROR
Description This message is generated when the setting of a row on the STG table fails.
Synopsis The fields in the STG table entry may be corrupted.
Action Contact customer support for further troubleshooting.
316806-C