Nortel 8300 Reference Manual page 129

Message Password modified for user-exec mode
Severity INFO
Description This message indicates the password has been successfully changed for
user-exec mode.
Synopsis N/A
Action N/A
Message PCAP File in PCMCIA is being over-written
Severity INFO
Description This message is generated when the PCAP autosave file in the PCMCIA is being
overwritten.
Synopsis N/A
Action Copy the file from the PCMCIA.
Message Pcl size is unexpectedly large <value>
Severity ERROR
Description This message indicates that the specified ACG required more than 128 filters in
the hardware. This may result from an attempt to use rules with conditional
matching like greater, less, range, not-equal.
Synopsis N/A
Action Try to minimize the operators. If that does not hel, remove some ACEs from the
ACLs.
Message PCMCIA is removed, Logging resumes on DRAM
Severity ERROR
Description This message indicates that the PCMCIA card is removed.
Synopsis N/A
Action N/A
Message PD may be disconnected due to new power limit
Severity WARNING
Description This message indicates that the power limit was reduced which may cause the PD
to be disconnected due to lack of power.
Synopsis N/A
Action Check to see if any PD power has been disconnected and if necessary, re-assign
the power limit.
Chapter 4 SMP log error messages 129
System Messaging Platform Reference Guide