Nortel 8300 Reference Manual page 100

100 Chapter 4 SMP log error messages
Message IfRec(ipaddr=<ipaddr>, index=<index>) - Exceeded NVRAM limit of <value>
Severity WARNING
Description This message is generated when the available NVRAM space for storing records
is exhausted.
Synopsis NVRAM limit exceeded.
Action No action needs to be taken.
Message igmpAddMltMap: could not allocate mem for p_entry
Severity ERROR
Description memory allocation failure
Synopsis N/A
Action N/A
Message igmpCacheUnsolData: unable to allocate IGMP_SRCGRP
Severity ERROR
Description This message is generated if the source/group pair allocation is unsuccessful.
This is because the memory allocation for the source/group pair failed due to low
DRAM memory.
Synopsis Allocation of source/group pair failed.
Action Contact customer support for further troubleshooting.
Message igmpCreateSrcRec: unable to allocate IGMP_SRC
Severity ERROR
Description This message is generated when trying to allocate memory for the IGMP source
group and the system finds that it is unable to do so due to low memory.
Synopsis Unable to allocate memory to IGMP source.
Action Increase the DRAM size.
Message IgmpGrpCreate : Error in igmpAlloc!
Severity ERROR
Description This message is generated when you try to create a new IGMP group, but there is
not enough memory to save it. This error can be caused by a lack of memory.
Synopsis Cannot allocate memory dynamically.
Action Close all CLI sessions to free up memory.
316806-C