Nortel 8300 Reference Manual page 65

Message Could not allocate context
Severity ERROR
Description This message indicates that context for the NNCLI could not be allocated.
Synopsis N/A
Action Reboot the switch and contact customer support if the problem persists.
Message Could not allocate memory for bufLog!
Severity WARNING
Description This message indicates the Passport 8300 is unable to allocate memory.
Synopsis N/A
Action N/A
Message Could not allocate memory for new next-hop entry
Severity ERROR
Description Memory cannot be allocated for the new software next-hop entry.
Synopsis N/A
Action Contact the customer support team if the problem persists.
Message Could not create xlrclip for nncli
Severity ERROR
Description This message specifies the Passport 8300 is unable to create xlrclip for the
NNCLI.
Synopsis N/A
Action Reboot the switch and contact customer support if the problem persists.
Message Could not delete software mirroring Entry <id>
Severity WARNING
Description This message specifies that a mirroring software table entry cannot be deleted
because the table is empty or the ID cannot be found.
Synopsis N/A
Action Verify correct command parameters in documentation and retry.
Chapter 4 SMP log error messages 65
System Messaging Platform Reference Guide