Nortel 8300 Reference Manual page 98

98 Chapter 4 SMP log error messages
Message Hot Insert: trUpdateAppDemoPpConfigList failed for slot <value>
Severity ERROR
Description This message indicates that the updating of the ppDemo Configuration list failed.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message Hot insertion failed for device <value>
Severity ERROR
Description This message indicates that a hot insertion failed for a newly- inserted card in the
system for the given device.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message Hot removal failed for device <value>
Severity ERROR
Description This message indicates that a hot removal of a given device for a particular slot
failed.
Synopsis N/A
Action N/A
Message Hot removal of slot <value> xbar failed
Severity ERROR
Description This message indicates that crossbar removal/cleanup was unsuccessful.
Synopsis N/A
Action N/A
Message Hot Remove: device <value> does not exist
Severity ERROR
Description This message specifies that during hot removal, a given device on the hot
removed slot does not exist.
Synopsis N/A
Action N/A
316806-C