Nortel 8300 Reference Manual page 166

166 Chapter 4 SMP log error messages
Message radDictAttrSet Can't set value for attribute<string>
Severity ERROR
Description This message indicates that a RADIUS attribute unknown to the switch is being
looked-up.
Synopsis Unknown attribute in received RADIUS or sent packet.
Action Verify that the sent and received RADIUS packets contain known attributes.
Message radInsertServer can't lock mutex
Severity ERROR
Description This message indicates that the switch is unable to acquire a software resource.
Synopsis Software error.
Action Contact customer support.
Message radInsertVp FATAL value pair
Severity ERROR
Description This message indicates that the system is out of memory.
Synopsis Insufficient memory.
Action If the problem persists, contact customer support.
Message RADIUS authentication failed at <addr> : <msg>
Severity INFO
Description This message indicates that RADIUS authentication failed at server <addr>.
Failure reason is given in <msg>.
Synopsis N/A
Action N/A
Message RADIUS authentication failed at<string> s
Severity INFO
Description This message indicates that authentication failed for the specified user on the
specified server.
Synopsis Authentication alert.
Action N/A
316806-C