Nortel 8300 Reference Manual page 84

84 Chapter 4 SMP log error messages
Message FAILED To write mcast table to Xbar on slot <value>
Severity ERROR
Description This message indicates that the multicast table was not successfully written to the
crossbar on the standby CPU.
Synopsis N/A
Action Re-insert or replace the card.
Message -FATAL- vlanTblEntrySync: malloc failed!
Severity ERROR
Description This message is generated when table-based synchronization of the IP address
assigned to a VLAN occurs. This is caused by unavailable memory and thus,
memory cannot be allocated for the entry.
Synopsis Unable to allocate memory for the VLAN entity.
Action Increase the DRAM size.
Message file <file> function <function> line <line> bitnum <bitnum> Software license
violation <message>
Severity WARNING
Description This message specifies a software license violation. There is no license to
execute this command.
Synopsis N/A
Action Contact the customer support team.
Message file already present in the PCMCIA
Severity INFO
Description This message is generated when PCAP tries to save captured packets to the
PCMCIA (autosave). The file is already present and PCMCIAWRAP is false.
Synopsis N/A
Action Set PCMCIAWRAP to TRUE or remove the file from the PCMCIA.
Message Filter could not be configured on interface <value>
Severity ERROR
Description This message is generated when restoring a filter configuration for ports on the
hot-inserted card is unsuccessful.
Synopsis N/A
Action Reconfigure the filters or source the configuration file.
316806-C