Page 2
ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject to change without notice. Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks. All other trademarks are the property of their respective owners.
Regulatory information and safety precautions International regulatory statements of conformity This is to certify that the Nortel Networks 8300 series chassis and components installed within the chassis were evaluated to the international regulatory standards for electromagnetic compliance (EMC) and safety and...
Page 6
EN 55 024 statement This is to certify that the Nortel Networks 8300 series chassis is shielded against the susceptibility to radio interference in accordance with the application of Council Directive 2004/108/EC. Conformity is declared by the application of EN 55 024 (CISPR 24).
Page 8
CE marking statement (Europe only) EN 60 950 statement This is to certify that the Nortel Networks 8300 series chassis and components installed within the chassis are in compliance with the requirements of EN 60 950 in accordance with the Low Voltage Directive.
30 days of purchase to obtain a credit for the full purchase price. "Software" is owned or licensed by Nortel Networks, its parent or one of its subsidiaries or affiliates, and is copyrighted and licensed, not sold. Software consists of machine-readable instructions, its components, data, audio-visual content (such as images, text, recordings or pictures) and related licensed materials including all whole or partial copies.
Page 16
Upon termination or breach of the license by Customer or in the event designated hardware or CFE is no longer in use, Customer will promptly return the Software to Nortel Networks or certify its destruction. Nortel Networks may audit by remote polling or other reasonable means to determine Customer’s Software activation or usage levels.
Page 17
Customer fails to comply with the terms and conditions of this license. In either event, upon termination, Customer must either return the Software to Nortel Networks or certify its destruction. Customer is responsible for payment of any taxes, including personal property taxes, resulting from Customer’s use of the Software.
New in this Release The following sections detail what’s new in Nortel Ethernet Routing Switch 8300 Installation — DC Power Supply, NN46200-310 for Release 4.1: • “Features” (page 19) • “Other changes” (page 19) Features The 8005DC and 8005DI DC is a new feature for the Ethernet Routing Switch 8300.
Nortel Ethernet Routing Switch 8300 Administration, NN46200-604. Task and estimated time The following table lists the estimated time to install a DC power supply for the Ethernet Routing Switch 8300. The estimated installation time can range from 15 to 50 minutes. The installation time depends on the chassis model and the number of power supplies you are installing.
DC power supply accessories The Ethernet Routing Switch 8300 chassis ships with no installed power supplies. Install the first power supply in the left-most bay. Power supply bays are numbered 1, 2, and 3 from left to right as viewed from the front of the chassis for the 8306 and 8310.
24 DC power supply fundamentals In addition to the DC power supply and the installation guide, your DC power supply shipment contains several hardware accessories. Verify that the items in the shipping container match those on the shipment packing list.
Ethernet Routing Switch 8300 system, see number of DC power supplies” (page 8005DC power supply Each 8005DC power supply provides 1462 W of power to the switch. The 8005DC power supply does not provide any power for Power over Ethernet (PoE).
Ethernet Routing Switch 8300 system in a redundant configuration at all times to ensure maximum network performance. ATTENTION A redundant power supply ensures that the system does not fail if a single power supply fails. If a chassis has the minimum power supply configuration and one power supply fails, the system loses power and network connectivity.
DC power supply installation This chapter provides instructions to install the DC power supply in the Ethernet Routing Switch 8300 chassis. See Nortel Ethernet Routing Switch 8300 Administration, NN46200-604 for the minimum Ethernet Routing Switch 8300 software version required to support the hardware.
Prepare the cables for installation of the power supply of the Ethernet Routing Switch 8300. Nortel does not supply the cables for connecting the DC power supply to the DC input power source. Select cables that comply with the electrical code of the country where you use the DC power supply.
Page 32
See the following figure for the exact location of the power switches. Remove the filler panel from the power bay if necessary. If you are replacing a failed power supply, remove the failed DC power supply. Grasp the handle of the new power supply.
Page 33
Push the new power supply partway into the bay, leaving the terminal block at the side of the power supply exposed. Use a Phillips screwdriver to remove the screw that secures the plastic safety cover to the power supply and remove the cover.
Page 34
Attach the negative voltage lead to the negative terminal on the power supply to insert a lock washer between the crimp lug and each hex nut. Use a 7/16 inch hex wrench to tighten the hex nut on each terminal.
Page 43
To maintain proper cooling, never operate the Ethernet Routing Switch 8300 with an empty power supply bay. If you are replacing a failed power supply and you do not have a power filler panel, leave the failed power supply installed until a replacement power supply is available.
• “Model 8005DC power supply” (page 48) Model 8005DI DC power supply This section provides power ratings for the 8005DI DC input power supply and output power supply. DC input power specifications The following table describes the technical specifications for DC input power for Model 8005DI DC power supply.
Modules Fans MTBF Model 8005DC power supply This section provides power ratings for the 8005DC input power supply and output power supply. DC input power specifications The following table describes the technical specifications for DC input power for Model 8005DC power supply.
Page 52
NORTEL PROVIDES THIS DOCUMENT "AS IS" WITHOUT WARRANTY OR CONDITION OF ANY KIND, EITHER EXPRESS OR IMPLIED. The information and/or products described in this document are subject to change without notice. Nortel, the Nortel logo, and the Globemark are trademarks of Nortel Networks. All other trademarks are the property of their respective owners.