Nortel 8300 Reference Manual page 72

72 Chapter 4 SMP log error messages
Message cppStart: Can't create socket tx task
Severity INFO
Description This message is generated when a drastic situation arises and the system ceases
bringing up an operation. For example, during system start-up, it could not create
a task used to process the request to send packets.
Synopsis N/A
Action N/A
Message cppStart: Inconsistent value of the CP physical port number!
Severity INFO
Description This message is generated when a drastic situation arises and the system ceases
bringing up an operation. For example, during the system start-up, the physical
port representation does not match the expected value.
Synopsis N/A
Action N/A
Message cppTxFrameBody: can't take semaphore!
Severity FATAL
Description This message is generated when the system could not obtain the semaphore
needed to transmit packet.
Synopsis N/A
Action Reboot the switch and contact the customer support team if the problem persists.
Message cppTxFrameBody: could not create gtBuf for transmit vlan=<vlanid>
Severity WARNING
Description This message is generated during the packet transmit from the system gtBuf
buffer when the driver is not available. Thus, the packet that needs to be sent for
the VLAN will not be sent.
Synopsis N/A
Action N/A
316806-C