Nortel 8300 Reference Manual page 179

Message rcIpGo: NPAL_EnableVrId failed
Severity FATAL
Description This message is generated when the system couldn't create the virtual router in
hardware.
Synopsis N/A
Action Reboot the switch and contact the customer service team if the problem persists.
Message rcipIgmpGroupTblEntryAdd: Can't malloc
Severity ERROR
Description This message is generated when the system is unable to allocate memory for the
IGMP group table entry.
Synopsis Memory unavailable.
Action Increase DRAM memory size.
Message rcIpLoadArpRec: unable to allocate a StatArpRec for IfIndex <value>
Severity ERROR
Description This message is generated when the allocation of a static ARP record fails due to
a memory allocation problem.
Synopsis Memory allocation for the static ARP entry failed.
Action Contact customer support for further troubleshooting.
Message rcIpLock: Can't take semaphore, rcIpRouteLockSemId
Severity ERROR
Description This message is generated when an attempt to acquire this semaphore fails.
Synopsis Getting a semaphore failed.
Action Contact customer support for further troubleshooting.
Message rcIpMakeVlanRoutable: ipFindRoute failed for IfIndex <value>
Severity FATAL
Description This message is generated when making the VLAN routable and finding IP failed.
Synopsis Unable to find the IP route for the given index.
Action Contact customer service and have the following information available for further
analysis: system logs including any memory dumps, switch configuration, and
network topology.
Chapter 4 SMP log error messages 179
System Messaging Platform Reference Guide