K Messages - Nortel 8300 Reference Manual

108 Chapter 4 SMP log error messages
Message ipReasmInit: Can't allocate ipNDBTbl!
Severity ERROR
Description This message is generated when system is not able to allocate memory for the
Net data block table.
Synopsis Cannot allocate memory dynamically.
Action Close all CLI sessions to free up memory. Contact customer support if problem
persists.
Message ipReasmInit: Can't allocate ipReasmTbl!
Severity ERROR
Description This message is generated when the system is not able to allocate memory for
the IP reassembly table.
Synopsis Cannot allocate memory dynamically.
Action Close all CLI sessions to free up memory. Contact customer support if problem
persists.

K Messages

Message Keepalive expired for <value> connection with Id <value> to Slot <value>
Severity ERROR
Description This message indicates the connection between the CP and I/O card timed out.
Synopsis N/A
Action Hot remove and hot insert the I/O card.
L Messages
Message lbStart: NPAL_AddMacAddress failed with <value>
Severity WARNING
Description This message indicates the NPAL_AddMacAddress failed when doing a loopback
test.
Synopsis N/A
Action Contact the customer support team if the problem persists.
316806-C