Nortel 8300 Reference Manual page 183

Message rcIpStaticRtSyncCallback: unsupported msg type <value>
Severity ERROR
Description This message is generated when an invalid message type is encountered.
Synopsis Invalid message type encountered.
Action This is an internal error. Contact customer support for further troubleshooting.
Message rcIpSuperNetAddRoute: rarAddIpRoute failed with <value>:<ipaddr> mask:
<mask> nh:<ipaddr> pRent <value>
Severity ERROR
Description This message is generated if adding an IP route fails while trying to add a
supernet address.
Synopsis Invalid mask and route entry.
Action Contact customer support for further troubleshooting.
Message rcIpSuperNetAddRoute: rarAddIpRoute failed with <value>:<ipaddr>
mask:<ipaddr> nh: <ipaddr>
Severity ERROR
Description This message is generated if adding an IP route fails while trying to add all
supernet addresses.
Synopsis Unable to add IP route entry.
Action Contact customer support for further troubleshooting.
Message rcIpSuperNetReplaceRoute: rarReplaceIpRoute failed with <value> for route:
<ipaddr> mask: <mask> NextHop: <ipaddr>
Severity ERROR
Description This message is generated if replacing an IP route fails while trying to replace a
supernet address.
Synopsis IP address fails.
Action Contact customer support for further troubleshooting.
Message rcIpTask: Can't create <value> message queue
Severity FATAL
Description This message is generated when the rcipTask is unable to create a new message
queue.
Synopsis No memory space left. Lack of memory, unable to create message.
Action Increase the DRAM size and contact customer support for further troubleshooting.
Chapter 4 SMP log error messages 183
System Messaging Platform Reference Guide