Nortel 8300 Reference Manual page 165

Message RadAuthNonEapMacAddr: no radius server configured
Severity INFO
Description This message is generated when no radius server is configured while building the
authentication request packet for the non-EAP client.
Synopsis No radius server is configured
Action Configure the radius server for EAP.
Message radClearStat can't lock mutex
Severity ERROR
Description This message indicates that the switch is unable to acquire a software resource.
Synopsis Software error.
Action Contact customer support.
Message radCliClearStat: can't lock mutex!
Severity ERROR
Description This message is generated when the system could not obtain the semaphore.
Synopsis N/A
Action Reboot the switch and contact the Customer Service team if the problem persists.
Message radCreateServer Can't allocate Server Entry
Severity FATAL
Description This message indicates that the switch is unable to create a RADIUS server due
to memory not being available.
Synopsis Insufficient memory.
Action If the problem persists, contact customer support.
Message radDictAttrGetValue Can't get value for attribute<string>
Severity ERROR
Description This message indicates that a RADIUS attribute unknown to the switch is being
looked-up.
Synopsis Unknown attribute in received RADIUS or sent packet.
Action Verify that the sent and received RADIUS packets contain known attributes.
Chapter 4 SMP log error messages 165
System Messaging Platform Reference Guide