Ex4500 Switch Hardware And Cli Terminology Mapping; Table 4: Cli Equivalents Of Terms Used In Documentation For Ex4500; Switches; Virtual Chassis - Juniper EX4500 Hardware Manual

Related
Documentation

EX4500 Switch Hardware and CLI Terminology Mapping

Table 4: CLI Equivalents of Terms Used in Documentation for EX4500 Switches
Hardware Description
Item (CLI) (CLI)
Chassis EX4500-40F
Copyright © 2017, Juniper Networks, Inc.
BF—Back-to-front airflow
The C in the model number indicates that the switch supports Data Center Bridging
(DCB), also known as Converged Enhanced Ethernet (CEE). The absence of C in the
model number of switches that do not support Virtual Chassis indicates that the switch
does not support DCB.
NOTE: All models of EX4500 switches that support Virtual Chassis
(switches that have the label
DCB even though their model numbers do not have a
The DC in the model number indicates that the switch model supports DC power
supply.
The VC in the model number indicates that the switch model can be used in a Virtual
Chassis configuration.
NOTE: All EX4500 switch models can be used in a Virtual Chassis
configuration if you have installed the Virtual Chassis module.
EX4500 Switch Models on page 7
This topic describes the hardware terms used in EX4500 switch documentation and the
corresponding terms used in the Junos OS command line interface (CLI). See
Table 4 on page 11.
Value (CLI)
–

VIRTUAL CHASSIS

Item In Documentation
Switch chassis
Chapter 1: System Overview
on the front panel) support
C appended.
Additional Information
"Chassis Physical
Specifications for EX4500
Switches" on page 15
11