Ex4300 Switch Hardware And Cli Terminology Mapping; Table 10: Cli Equivalents Of Terms Used In The Documentation For Ex4300 - Juniper EX4300 Hardware Manual

EX4300 Switch Hardware Guide
Related
Documentation

EX4300 Switch Hardware and CLI Terminology Mapping

Table 10: CLI Equivalents of Terms Used in the Documentation for EX4300 Switches
Hardware
Item (CLI) Description (CLI)
Chassis One of the following:
EX4300-24T
EX4300-24P
EX4300-32F
EX4300-48T
EX4300-48P
Routing One of the following:
Engine (n)
EX4300-24T
EX4300-24P
EX4300-32F
EX4300-48T
EX4300-48P
20
48T—The switch has 48 10/100/1000BASE-T Ethernet network ports.
48P—The switch has 48 10/100/1000BASE-T Ethernet network ports with all ports
equipped for PoE+.
AFI indicates that the switch is shipped with two fan modules and a power supply,
each bearing an
AIR IN (AFI)
ship with two fan modules and a power supply, each bearing an
The labels on the fan modules and the power supplies indicate the direction of airflow
they provide within the chassis when installed in the switch.
back-to-front airflow, and
The DC in the model number indicates that the switch model works on DC power
supply. Switches that do not have DC in their model numbers work on AC power supply.
EX4300 Switch Models on page 15
This topic describes the hardware terms used in EX4300 switch documentation and the
corresponding terms used in the Junos OS CLI. See
Value
–
n is a value in the range 0
through 9.
On a standalone switch,
the default value is 0.
On a Virtual Chassis
configuration, the
values correspond to
the member IDs of
switches configured in
the master role and the
backup role in the
Virtual Chassis.
label. Switches that do not have AFI in their model numbers
AIR OUT (AFO) labels indicate front-to-back airflow.
Table 10 on page
Item In Documentation
Switch chassis
Routing Engine
AIR OUT (AFO)
labels indicate
AIR IN (AFI)
20.
Additional Information
"Identifying EX4300
Switch Models" on
page 19
–
Copyright © 2017, Juniper Networks, Inc.
label.