Setting The Aux Mix Transition Rate - Sony MVS-8000X SystemMVS-7000X System User Manual

Notes
When a clip transition is selected as the transition type, it
is not possible to change the transition rate in this menu.
To set the independent key transition rate
By way of example, the following is the procedure for
settings of keys 1 to 4 in the M/E-1 block.
1
Press in the list in the status area of the Misc
>Transition >Key/ME/FTB menu, to select M/E-1.
2
In the <Transition Rate> group, press [Key K1-K4].
To insert (on) or remove (off) keys individually, press
[Key(On) K1-K4] or [Key(Off) K1-K4].
3
Turn the knobs to set the number of frames.
Knob Parameter Adjustment
1 Key1 Trans Key 1 transition
Rate rate
2 Key2 Trans Key 2 transition
Rate rate
3 Key3 Trans Key 3 transition
Rate rate
4 Key4 Trans Key 4 transition
Rate rate
To set the fade-to-black transition rate in
the Transition >Key/ME/FTB menu
1
In the Misc >Transition >Key/ME/FTB menu, press
[FTB].
2
Turn the knob to set the number of frames.
Knob Parameter Adjustment
1 Transition Transition rate
Rate

Setting the AUX Mix Transition Rate

For details of AUX mix transitions, see "AUX Mix
Transitions" (page 119).
1
In the menu control block, press the top menu
selection button [MISC], then select VF3 'Transition'
and HF3 'Aux Mix.'
The Misc >Transition > Aux Mix menu appears.
2
Use one of the following methods to select the target
AUX bus (odd-numbered bus) in the status area list.
• Directly press the list in the status area.
• Press the arrow keys to scroll the reverse video
• Turn the knob.
Knob Parameter Adjustment
1
3
Turn the knob to set the number of frames.
Knob Parameter Adjustment
2
Setting values
0 to 999
(frames)
0 to 999
(frames)
0 to 999
(frames)
0 to 999
(frames)
Setting values
0 to 999
(frames)
cursor.
No AUX bus
selection
Transition Transition rate
Rate
Setting values
1 to 24
Setting values
0 to 999
(frames)
235
Misc Menu Operations