Sony MVS-8000X SystemMVS-7000X System User Manual page 616

Knob Parameter Adjustment Setting
2 LB
Position
To return the letterbox image to the center
In the <Letter Box Position> group, press [Center].
Making enhancer settings
1
In the Switcher >Input >FC Adjust menu, press
[Enhancer], turning it on.
2
Set the following parameters.
Parameter group [1/2]
Knob Parameter Adjustment
2 Detail Gain Adjust the edge
3 Limiter
4 Crisp
5 Level
Depend
Parameter group [2/2]
Knob Parameter Adjustment
2 Frequency
3 H/V Ratio
616
Signal Input Settings (Input Menu)
Setting
format values
–31 to +32
Image 1080i/
59.94,
position
1080PsF
/29.97
–36 to + 36
1080i/
50,
1080PsF
/25
–30 to +30
720P/
59.94,
720P/50
Setting values
0 to 127
enhancement
sharpness
Adjust the 0 to 63
maximum signal
level to be added
to the original
signal
Set the 0 to 15
amplitude value
for which a low-
amplitude signal
is not
emphasized
Set the 0 to 15
luminance range
for edge
enhancement
Setting values
Set the central 0 to 3
frequency for
edge
enhancement
Set the 0 to 7
horizontal/
vertical ratio for
edge
enhancement
Making detailed settings for down-
conversion
1
In the Switcher >Input >FC Adjust menu, select the
input to which the setting applies.
2
In the <Aspect> group, select one of the following.
Edge Crop: Crop the left and right sides of a 16:9
image to convert it to a 4:3 image.
Letter Box 13:9: Crop the left and right sides of a 16:9
image to make a 13:9 image and add black bars at
the top and bottom of the 13:9 image to make a 4:3
image.
Letter Box 14:9: Crop the left and right sides of a 16:9
image to make a 14:9 image and add black bars on
the top and bottom of the 14:9 image to make a 4:3
image.
Letter Box 16:9: Add black bars on the top and
bottom of a 16:9 image to convert it to a 4:3 image.
Squeeze: Compress a 16:9 image horizontally to
convert it to a 4:3 image.
For details of the image transformations, see the
following figure.