Table of Contents
Advertisement
The indication of the memory recall button reverts from
the wipe pattern or register name to the register number.
Notes
In a simple type Flexi Pad control block, it is not possible
to delete a wipe snapshot.
Wipe Snapshot Operations With the
Menus
Menus used
As an example, when operating on M/E-1, select M/E-1
>Wipe >Wipe Snapshot.
The Wipe Snapshot menu appears.
Button displays
In setup you can select whether the memory recall buttons
show the pattern number or register name.
For details, see "Operation Settings (Operation Menu)"
in Chapter 19 (Volume 2).
Saving a wipe snapshot from the menu
1
Set up the wipe you want to save.
2
In the Wipe Snapshot menu, press [Store], lighting it
amber.
3
Press the memory recall button for the register in
which you want to save.
Notes
• If you press a button which is already lit, this overwrites
the contents of the register.
Memory recall buttons
• When both the main pattern and sub pattern are selected
for a pattern mix, the button in the memory recall section
shows only the main pattern.
Recalling a wipe snapshot from the menu
In the Wipe Snapshot menu, press the memory recall
button for the wipe snapshot you want to recall.
This recalls the wipe snapshot, and the button you pressed
lights amber.
In the upper left is shown the currently recalled register
name or number.
Notes
The Flexi Pad control block and menu settings are linked.
A setting in setup determines whether register names or
pattern numbers appear.
Deleting a wipe snapshot from the menu
1
In the Wipe Snapshot menu, press [Delete].
2
Press the memory recall button for the wipe snapshot
you want to delete.
179
Wipe Snapshots
Advertisement
Table of Contents
