Sony MVS-8000X SystemMVS-7000X System User Manual page 294

Multi format switcher system with ccp-8000 series center control panel
Table of Contents

Advertisement

Example: Moving the right edge position in the "minus"
direction.
Softening the inner and outer sides of art
edges
1
In the Art Edge menu, press [Soft], turning it on.
2
Adjust the following parameters.
Knob Parameter Adjustment
1
Inner H
2
Inner V
3
Outer H
4
Outer V
294
Applying Special Effects (Edge Effects)
Moving in the
minus direction
Position after
Position before
moving
moving
Art edge portion
Setting values
Simultane-
0.00 to 100.00
ously adjust
softness of
left and right
inner edges
Simultane-
0.00 to 100.00
ously adjust
softness of
top and
bottom inner
edges
Simultane-
0.00 to 100.00
ously adjust
softness of
left and right
outer edges
Simultane-
0.00 to 100.00
ously adjust
softness of
top and
bottom outer
edges
Knob Parameter Adjustment
5
All
Simultane-
ously adjust
softness of
all inner and
outer edges.
Setting the way in which art edge colors
change
1
In the <Art Edge Source> group of the Art Edge menu,
select the color pattern to apply to the art edges.
Flat Color: Uses Color 1 (see page 296) as a flat color.
Gradation Matte: Color 1 changes to Color 2 (see
page 296) at the border lines (see step 2 (page
294)).
Rainbow Matte: The color set as Color 1 changes hue
into color on the border lines.
Radial Gradation: Color 1 on the inner side is mixed
into Color 2 on the outer side, according to the
shape of the art edge.
Radial Rainbow: The hue of Color 1 on the inner side
changes into Color 2 on the outer side, according
to the shape of the art edge.
Rainbow Gradation: Color 3 (see "Color 3 settings"
(page 296)) overwrites Radial Rainbow, giving a
gradation effect.
Flat Color
Rainbow Matte
Radial Rainbow
2
When you select other than [Flat Color], set the
gradation border lines for the selected pattern.
Border line parameters for Gradation Matte and
Rainbow Matte
The valid ranges of the parameter values depend on the
combination of signal format (SD/HD) and aspect
ratio (4:3/16:9) selected in the system, as follows.
Setting values
Value of Outer H
shown
Gradation Matte
Radial Gradation
Rainbow Gradation

Advertisement

Table of Contents
loading

Table of Contents