Table of Contents
Advertisement
2
Press the group name button.
3
Press the button to which the menu macro is assigned.
To stop a menu macro during execution
Press [MenuMacro Stop].
Menu Macro Creation and Editing
Create or edit menu macro registers.
Notes
It is not possible to execute a menu macro during editing.
To run the macro, first press [Store] to end editing.
Creating a new menu macro
1
In the Macro >Menu Macro Register >Recall & Run
menu, select an empty register in the menu macro
register list.
For details of the method of operation, see "Recalling
a menu macro register" (page 522).
2
Press [Menu Macro Edit].
The menu macro register is recalled, and the system is
now in menu macro editing mode.
The Menu Macro Edit menu appears.
Menu macro register
number
Menu macro
register name
3
If required, press [Auto Insert] to switch the auto insert
mode on or off.
In the auto insert mode, when you carry out a menu
operation, this is automatically recorded as an event in
the menu macro.
524
Menu Macros
Menu macro register
Event number
configuration list
Remaining Memory
Menu macro creation event list
4
Create an event (carry out the menu operation you
want to record as an event in the menu macro).
For details of menus that can be recorded, see page
522.
• When auto insert mode is on, carrying out a menu
operation automatically saves the event in a menu
macro.
• When auto insert mode is off, skip to step 5.
5
When auto insert mode is off, press [Insert Before] or
[Insert After] to save the event.
6
Repeat steps 4 and 5, to record the required events in
the menu macro.
7
Turn the knob to input the event execution interval.
Knob Parameter Adjustment
5
Event interval
Interval
Time (Sec)
This value can be set for each menu macro register.
8
Press [Store].
The numeric keypad window appears.
9
Enter the menu macro register number as required, and
press [Enter].
The menu macro is saved with the specified number.
The menu returns to the state in step 1.
To set a pause duration
During menu macro editing, use the following procedure.
1
Enter the pause duration by turning the knob.
Knob Parameter Adjustment
4
Pause duration
Pause
Time (Sec)
2
Press [Pause Set].
• When auto insert mode is on, this sets the pause
duration, and inserts the pause event.
• When auto insert mode is off, use the same
operations as in step 5 of "Creating a new menu
macro" (page 524) to save the event.
Editing a menu macro
To edit the content of a menu macro, use the following
procedure.
Setting values
0.0 to 0.5 (sec)
Setting values
0.1 to 99.9 (sec)
Advertisement
Table of Contents
